FormFutura® Engineering LCD Series - Strong Resin

Formfutura’s Engineering LCD Series photopolymer 3D printing resins are specifically engineered for compatibility and excellent processability with all type of open source LCD / LED / MSLA 3D printers.Engineering LCD Series – Strong ResinOur Engineering LCD Series – Strong Resin is a black colored 3D printing resin that finds its "strength" in a unique combination of excellent flexural strength properties combined with impressive tensile strength properties. The combination of strenght with stiffness make  FormFutura’s Engineering LCD Series – Strong Resin a very versatile 3D printing resin for a wide range of heavy duty applications.

Key features

• Flexural strength up to 120 MPa

• Stiff and durable

• Strong

• High dimensional accuracy and low shrinkage

• Almost odorless processing

• Compatible with all open-source SLA, DLP, and LCD 3D printers in the range of 385 - 405nm

Applications

• Jigs and fixtures

• Tooling

• Functional prototyping

• Manufacturing aids

• Short-run manufacturing

Preparation(s) before starting to print

• Shake the bottle for at least 2 minutes before each use.

• After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

• The resin can be poured back from the vat into the bottle once your print is finished

• Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Post-processing

• We do advise you to post-process your 3D print in order to achieve the material properties

• Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5-10 minutes

• An ultrasonic cleaner is preferred/recommended

• Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing to prevent warping or cracking.

• Place the rinsed parts in a well-ventilated area for at least 4 hours, or use pressurized air for at least 5 minutes

• Cure your object in a high power curing chamber (like the CUREbox™ Plus) for approximately 60 minutes at 65°CAnd after that approximately 2 hours of thermal curing at 100°C. The preferred curing wavelength is between 300-410nm

Comparison of technical specifications for FormFutura Engineering LCD Series 3D printing resin

Within our  Engineering LCD Series of 3D printing resins, each resin focuses on a specific property. The table below shows the technical data for all our Engineering LCD resins and makes it easy to compare resins based on their mechanical properties. 

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

• Always wear Respiratory Protection when sanding/cutting the resin object.

• Always use nitrile gloves when handling resins and uncured resin objects.