top of page
1.png

LUVOCOM® 3F PAHT KK 50056 BK FR

About The Materials 

LUVOCOM 3F PAHT KK 50056 BK FR is a flame retardant High-temperature polyamide. Due to the halogen free ceramic spheres reinforcement you can 3D print flame resistance parts with thicknesses of ≥0.4mm and achieve UL-94 V0.

Materials Documentations

LUVOCOM® 3F PAHT KK 50056 BK FR

Luvocom® 3F PAHT KK 50056 BK FR is a flame retardant High-temperature polyamide. Due to the halogen free ceramic spheres reinforcement you can 3D print flame resistance parts with thicknesses of ≥0.4mm and achieve UL-94 V0. This material is optimised for FFF / FDM 3D printing systems and has enhanced printability with high chemical and mechanical properties. It's a PA6 based material but it exhibits lower water absorption and higher temperature resistance. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.


Features

  • High dimensional stability

  • Easy to print, low warping and increased layer adhesion

  • Flame retardant UL94 V0 @ 0.4mm (printed test bar)

    • UL94 Vertical Burning Test

    • EN 45545 (fire behaviour of materials in trains)

      • ISO 4589-2 OI (oxygen Index) R22 + R23 - HL1, HL2, HL3

      • ISO 5659-2 Ds (smoke density) R22 + R23 - HL3


Packaging

LUVOCOM® 3F PEEK 9581 NT is available on carton spools, repacked under quality control of Lehmann&Voss&Co


Storage

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. When the 3D printer is not being used it is important to keep filament in a bag and stored in a cool, dry and dark place until it is used again.

Applications

Materials Informations

Available in Store Now

bottom of page