3D4MAKER™ Facilan™ C8

For many 3D printers, C8 will print best at approximately 200°C with a bed temperature of 50°C and a speed of 50 mm/s. In designs with significant overhangs and bridges, best results are obtained with fans at 80%. If your model has no overhangs then putting your fans at 0% improves interlayer bonding and in so doing the final mechanical strength of your part. To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draŜ and/or temperature fluctuations. Keep the 3D printer out of direct sunlight. When the 3D printer is not being used it is important to the 3D printer is not being used it is important to keep the 3D4Makers Facilan™ C8 filament in a bag and stored in a cool, dry and dark place until it is used again.