3DXTECH™ ThermaX™ HTS (High Temp Support)
About The Materials
ThermaX™ HTS2 [High Temperature Support] break away support is ideal for printing high-temperature polymers including PSU, PES, PPSU, PPS, Ultem™ PEI, PEKK, and PEEK. This support adheres well to these advanced materials and then is broken away after printing to allow for complex geometry without damaging your part.
Materials Documentations
Thermax™ HTS2 High-Temp Support Filament [9085 Break Away Support]
Our break away high-temp support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials.
HTS is the premium support for our high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.
Works ideal with the following ThermaX™ materials:
PEKK [PolyEtherKetoneKetone]
PEEK [PolyEtherEtherKetone]
PEI made using ULTEM™
PPSU [Polyphenyl Sulfone]
PSU [Polysulfone]
PPS [Polyphenylene Sulfide]
Support Removal:
This is break-away support and does not dissolve.
High-Temp support is best removed while printed part is still warm.
If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.