Fiberlogy HD PLA (FDA Approved)
About The Materials
Materials Documentations
With our HD PLA you have many more options. You can use this material in two ways. Choose the one you like best. You can use it as a normal PLA and get prints characterized by a very good adhesion between the layers and high precision. You can also make your prints acquire similar properties to that of ABS – better impact resistance and high temperature resistance. All you need is an oven. Yes, an oven! By annealing our HD PLA in an oven, in accordance with the manual, you will avoid all the inconveniences of printing with ABS, such as unpleasant odour or hazardous fumes.
But these are not all the advantages of HD PLA. For the production of this material we have chosen raw materials that are approved for food contact in compliance with the EU directive and FDA regulations. HD PLA is also certified by RoHS.
APPLICATION:
* TOYS OR THEIR ELEMENTS: human figures, animals, constructions, houses, vehicles, dice
* GADGETS OR THEIR ELEMENTS: key rings, stands, phone cases
* PROTOTYPES: tools, concept models
* ELEMENTS OF JEWELLERY: earrings, bracelets, beads, necklaces
* SPARE PARTS: elements of machines, equipment, vehicles, electronic equipment
* TOOLS: complex elements requiring durability
* HOUSE EQUIPMENT: bowls, trays, boxes
PROPERTIES:
* biodegradability
* slightly glossy surface
* possibility of annealing the print in an oven and achieving properties similar to those of ABS
* after annealing – increased impact resistance and high temperature resistance
DIAMETER
1.75 MM
DIAMETER TOL
+/- 0.02 mm
OVAL TOL
+ 0.01 mm
PRINTING TEMP
200-230°C
TABLE TEMP
50-70°C
HOW TO PRINT?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
NOZZLE TEMPERATURE
200-230°C
BED TEMPERATURE
50-70°C
CLOSED CHAMBER
not required
FAN
75-100%
FLOWRATE
90-100%
PRINTING SPEED
< 100 mm/s
SURFACE
glass, masking tape
RETRACTION (DIRECT)
2-3 mm
RETRACTION (BOWDEN)
4-6 mm
RETRACTION SPEED
20-45 mm/s
NOTES
Easy PLA White – due to the dye, the suggested minimum printing temperature is 230°C
📌Royalforged Solution Malaysia📌
Contact No. : 011-56304686 (Jason)
Business WA: https://wa.me/message/PHBHMKAGAC6IJ1
Official Web: https://www.royalforgedsolution.com
===Authorozed Fiberlogy Reseller Malaysia===