LUVOCOM® 3F PAHT 9936 BK
About The Materials
LUVOCOM 3F PAHT 9825 NT is a PA6 filament that is engineered for quality controlled 3D printing of end-use parts that require strength and toughness in combination with a high temperature resistance.
Materials Documentations
LUVOCOM® 3F PAHT 9936 BK
LUVOCOM® 3F PAHT 9936 BK is an unreinforced polyamide-based formulation. LUVOCOM® 3F PAHT 9936 BK is a material from LEHVOSS. LUVOCOM® 3F PAHT 9936 BK has excellent tensile and impact strength and allows continued operation up to 100°C – 120°C while retaining 50% of its mechanical properties and short-term 160°C.
Features:
Lehvoss Luvocom 3F PAHT 9936 BK inside
Unreinforced PA6 filament with high strength and toughness
Temperature resistant up to 160 °C (200h)
50% reduced water uptake at a four times slower rate compared to other PA6 filaments
Tensile strength up to 78 MPa
3D prints with high dimensional accuracy and increased layer adhesion
Good electrical properties
Packaging
LUVOCOM® 3F PAHT 9936 BK is available on carton spools, repacked under quality control of Lehmann&Voss&Co
Additional information
Recommended temperature for heated bed is ± 60-70˚C. Adhesion is possible on different surfaces. LUVOCOM® 3F PAHT 9936 BK can be used on all common desktop FDM technology or FFF 3D printers. Dry the spool before printing: 12 hours at 70°C or 4 hours at 100°C.
Storage
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.